DJI Mavic 3M is available in Mainland China, North America, and other select regions. For more specific information regarding use and availability, check the official DJI website at https://ag.dji.com/mavic-3-m

You should avoid blocking the sunlight sensor when it is in use. For example, the vegetation indices, such as NDVI, cannot be obtained when it is blocked. In addition, you should avoid rubbing the sensor, since its performance will be affected if the surface is scratched.

No.

You can connect to the network RTK by using Wi-Fi on the remote controller.

It is bound to the remote controller.

DJI Mavic 3M features four 5.5MP single-band cameras and one 20MP RGB camera. The single-band cameras are as follows: green (G) 550 nm ± 16 nm, red (R): 650 nm ± 16 nm, Red edge (RE): 730 nm ± 16 nm, and Near-infrared (NIR): 860 nm ± 26 nm.

The monitoring of most crops and vegetation relies mainly on near infrared, red edge, red and green bands. For example, the NDVI, NDRE and GNDVI indices, commonly used for crop health monitoring, only use two to three of these four bands. Therefore, the absence of the blue band will have minimal impact on applications such as monitoring of crop growth and environments, as well as natural resource investigations.

The monitoring of most crops and vegetation relies mainly on near infrared, red edge, red and green bands. For example, the NDVI, NDRE and GNDVI indices, commonly used for crop health monitoring, only use two to three of these four bands. Therefore, the absence of the blue band will have minimal impact on applications such as monitoring of crop growth and environments, as well as natural resource investigations.

Multispectral focal length: 4.34 mm (focal length); 25 mm (35mm equivalent focal range)
Visible focal length: 12.29 mm (focal length); 24 mm (35mm equivalent focal range)

DN Value.

Each of the five camera sensor centers has been compensated in the photo EXIF coordinates according to its position relative to the on-board D-RTK antenna phase center. When the images are mapped, the DJI Terra or DJI SmartFarm Platform automatically uses this parameter for position compensation to ensure the accuracy of the map position.

Distortions in visible and multispectral cameras are individually corrected before they are shipped.

The original photo generated does not come with vignetting correction, but the parameters used for vignetting correction are included with each photograph.

All five cameras are time synchronized.

The storage paths are as follows. For normal photography: SD card-DCIM-DJI_2022********_***
For flight path operation: SD card-DCIM-DJI_2022********_***_task name

Users who are beginners are recommended to set the exposure mode of the multispectral and visible light camera to Auto and unlock the AE. The multispectral light metering mode of the system is set to global light measurement by default. The focus mode of the visible camera will be First Waypoint Focus.

It detects the reflective strength of the object being photographed over different bands and is widely used in agriculture and forestry for crop health, vegetation coverage, water environment pollution monitoring, and more.

FCC: 15 km
CE: 8 km
SRRC: 8 km
MIC: 8 km
* The above data was measured by the aircraft in an unobstructed, interference-free outdoor environment. It shows the farthest communication distance for one-way, non-RTH flights under each standard. During flight, pay attention to RTH reminders in the DJI Pilot 2 App.

The ROM of the remote control is 64GB. For extended storage capacity, microSD card use is also supported.

Yes.

No. According to real-name requirements, SIM cards must be purchased and activated with the user’s real name.

No.

Nano SIM cards are supported. eSIM SIM cards are not supported.

No.

The DJI Mavic 3 Series remote controller does not work with Mavic 3M, but the DJI Mavic 3 Enterprise-Series remote controller does.

No.

5,000 mAh, 15.4 V, 77 Wh.

When used with a DJI 100W USB-C Power Adapter, it takes about 1 hour and 10 minutes to fully charge an Intelligent Flight battery with the DJI Mavic 3M Charging Hub (100 W).
When connecting directly to the aircraft via the DJI 100W USB-C Power Adapter, it takes about 1 hour and 20 minutes to fully charge an Intelligent Flight battery.

43 minutes.
* This data was measured using DJI Mavic 3M in windless conditions at sea level at a constant speed of 36 kph until the battery reached 0%. Use for reference only. Please pay attention to RTH prompts in the DJI Pilot 2 app when flying.

Yes.

Yes.

It is recommended to connect to the C1 port.

The DJI Pilot 2 App supports importing polygon boundaries and waypoint missions for pre-planned aerial photography with KML/KMZ files. Import path: Route > KMZ Import > Select Table of Contents > Internal Storage/SD Card > Locate the KML/KMZ file.

The DJI Pilot 2 App supports importing DSM data for terrain follow during aerial surveying. DSM files are imported as follows: Flight Path > Create Flight Path> Mapping Mission > Terrain Follow > DSM File Selection > Select Table of Contents > Internal Storage/SD card > Find DSM File for Import.

Yes. You can schedule a flight path by importing a KMZ or KML file or, create flight path on Pilot 2.

Yes, the vegetation indices, such as NDVI, can be viewed in real-time on the remote controller during flight.

No.

No.

Not currently.

Flight Height: 500 m;
Flight Speed: Maximum horizontal flight speed is 21 m/s, minimum horizontal flight speed is 1 m/s (no wind, near sea level)

Flight Height: 500 m;
Flight Speed: Maximum horizontal flight speed is 21 m/s, minimum horizontal flight speed is 1 m/s (no wind, near sea level)

Via https://keisan.casio.com/exec/system/1224682277. Input the corresponding coordinates along with the date and time zone to confirm the sun’s altitude angle changes over time for that day.

Visible camera (orthophoto): (H/37.2) cm/pixel
Multispectral camera (orthophoto): (H/21.7) cm/pixel

The recommended environment for multispectral data acquisition with DJI Mavic 3M is when light conditions are good and the sun’s altitude angle is not less than 30°.

DJI Mavic 3M can directly perform terrain-follow aerial surveying via downward vision. It can also import DSM data for terrain-follow aerial surveying.

Yes. You can automate routine inspections and capture consistent results every time. Onboard AI recognizes the subject of interest and identifies it in subsequent automated missions to ensure consistent framing.

The Intelligent Flight battery and propeller guard.

No.

Yes.

Yes.

The PSDK port supports the RTK Module and official DJI Mavic 3 Enterprise Series Speaker.

Optional. Additional purchase required.

Optional. Additional purchase required.

The DJI 100W USB-C Power Adapter comes with a USB-C power cable that can sustain 100 W of power output. Direct connection to the DJI RC Pro Enterprise Edition has a charging power of 30 W, direct connection to the aircraft has a charging power of 88 W, and direct connection to the charging hub has a charging power of 100 W.

The DJI Mavic 3M’s Intelligent Flight battery, DJI 100W USB-C Power Adapter, and DJI Mavic 3 Charging Hub (100 W) all support PD and PPS fast charging protocols. DJI RC Pro Enterprise Edition supports PD and QC protocols.

https://enterprise.dji.com/djicare-enterprise

1. Damaged components not within the coverage
2. Drone, payload, or accessories are fully or partly missing;
3. Components within the coverage that are fully or partly stolen, robbed or discarded;
4. Damage caused by flight under unsuitable conditions;
5. Deliberate loss;
6. Abrasions and shell damage that do not affect the performance of the product;
7. Direct and indirect loss caused by natural disasters, wars, military actions, riots, coups, rebellions and terrorist activities;
8. Damage caused by use of the product for activities that are illegal or in violation of usage rules;
9. Indirect loss or anticipated profit in any form;
10. Replacement requests beyond the coverage period of DJI Care Enterprise;
11. Extra fees resulting from technical enhancements or performance improvements;
12. Damage resulting from modifications that are not in accordance with manual recommendations, or the use of incompatible batteries and chargers;
13. Damage resulting from the use of third party accessories, batteries, or software;
14. Damage due to unauthorized repair or replacement of parts;
15. Damage due to modification or disassembly of the product that is non-compliant with official documentation or unauthorized by DJI;
16. Damages due to incorrect installation, use and operation not in accordance with requirements in the user manual;
17. Circumstances specified in the terms of service leading to termination of replacement service under DJI Care Enterprise;
18. Any lawsuit, attribution and relevant expense related to DJI Care Enterprise warranty liability;
19. Application for service from outside the region of purchase;
20. Personal injury or property damage of consumers or other personnel caused by a drone, gimbal, camera, payload, or image sensor.

（1）Replacement Fee and Coverage Amount For the DJI Care Enterprise Basic or DJI Care Enterprise Basic (2-Year Plan) service, You need to pay a small replacement fee. Please < click here> for more details on the replacement fee.

For the DJI Care Enterprise Plus, you will not have to pay any additional fees if the replacement cost is within the coverage amount. Please < click here> for more details on the coverage amount.
If the balance of your coverage amount is insufficient to pay for the repair or replacement fee, you will need to make up for the exceeding amount in order to enjoy the repair or replacement service.

（2）Shipping Fees and Taxes Any two-way shipping fee incurred within the country or region for which you are requesting to use the DJI Care Enterprise service shall be borne by DJI. If you wish to send your product back internationally or across regions, you must first obtain the consent of DJI, and any tariffs and custom clearance, shipping, and other fees shall be borne by you. DJI has the right to refuse to provide this service if any of the above criteria is not met.

DJI Care Enterprise is an after-sales service plan specially designed for DJI Enterprise products, allowing you to fly with peace of mind without worrying about accidental damage. DJI Care Enterprise offers three packages that provide tailor-made and comprehensive services based on your needs:

DJI Care Enterprise Basic
For accidental damage to DJI Enterprise products during normal use and operation within the coverage period, two replacements are offered, and each replacement costs a small additional fee.DJI has the right to require you to send back such components or reject your DJI Care Enterprise service request

DJI Care Enterprise Plus
For accidental damage to DJI Enterprise products during normal use and operation within the coverage period, a free repair or replacement service is available, provided that your total coverage amount is sufficient for the deduction of a fee equivalent to the damage assessment cost. Shared coverage can be extended to other DJI Enterprise devices bound to DJI Care Enterprise Plus within 30 calendar days after the first activation and binding.

DJI Care Enterprise Basic (2-Year Plan)
For accidental damage to DJI Enterprise products during normal use and operation within the coverage period, up to four replacements are offered by paying certain replacement service fee. In addition, official warranty is provided for the covered components during the validity period of the service plan.